-40%

Aged Mighty Mite Pvt Reserve Birdseye Strat Neck Relic Lic Stratocaster Fits MJT

$ 171.59

Availability: 100 in stock
  • Type: Neck
  • MPN: Does Not Apply
  • Brand: Mighty Mite
  • Color: Vintage Brown
  • Material: Maple
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • To Fit: Electric Guitar

    Description

    Brand New Mighty Mite Private Reserve Strat neck. This neck has been finished in nitrocellulose lacquer and aged to mimic the look of a vintage neck. Comes with pre-installed nut. Neck is brand new, has never been mounted to a body, and comes under factory warranty. Frets have been dressed and seem to be leveled from the factory. The frets were leveled by the manufacturer and dressed in our shop. Please refer to manufacturer's recommendations regarding fret care and humidity changes.
    **We now offer aged tuner installation for an extra cost. The tuners are aged Allparts nickel sealed 18:1 tuners (TK-7560) and are a upcharge installed. If you are interested in us installing these aged tuners to your neck, send us a message prior to purchasing and we will reply with appropriate offer.**
    Please note
    : if you plan to use vintage-style (Kluson) tuners on this neck, you will need to first purchase some 10mm conversion bushings and install them prior to the tuners. These can be purchased from most major online retailers.
    Fingerboard Material: Birdseye Maple
    Neck Material: Birdseye Maple
    Skunk Stripe: Merbau
    Finish: Satin Nitrocellulose Lacquer
    Neck Profile: C Shape
    Radius: 9.5" Straight
    Nut Width: 42mm
    Nut Material: PPS-Flat Bottom
    Heel Size: approximately 2 11/64" wide by 3" high and 5/8" deep
    Frets: 22 Jumbo (2.9mm) - Nickel
    Inlays: Abalone Dots
    Side Dots: Black
    Truss Rod: Single 4mm Adjustment at Headstock
    Tuner Reams: 10mm 6-in-line (Modern)
    Depth @ 1st Fret: 20.8mm
    Depth @ 12th Fret: 22.1mm
    Width @ 1st Fret: 43mm
    Width @ 12th Fret: 51.53mm
    *Please take note of measurements. Returns are subject to 10% restock fee. Mounting holes have not been drilled.