Bolt on Style Acoustic Neck Blank/ with mounting hardware

Description

Acoustic Bolt on Neck
Now with bolt on style tenon, matching neck block, mounting hardware,  and sound hole trussrod adjustment.
Scale size will be 25.4 and will mount at the 14th fret unless you notify us when you order . Wings may or may not beglued on each side of the headstock depending on what the availability is at the time. Mahog will always have wings glued on each side of the headstock.
Note: these are not guaranteed to work with other brands of neck blocks
We will need to know from you when you order, via note or message through Ebay,
the choice of wood since we are only charging a minimal fee for the wood(the cost is mostly in the labor on these models):  Medium Flamed maple, Genuine Mahog, or Walnut.
You may need to shorten or use shims on the end of the tenon for proper alignment depending on the thickness of your sides.
By Penta Guitarworks
Made in the USA
******
Please note: This product may take up to 10 working days until it ships out depending on our backlog
1.5 degree shoulder bolt on tenon, matching block, and our system of mounting hardware
1 3/4"W at the nut and 2 1/4 at the 14th fret where it joins the body.
Other neck widths are available upon request.
The heel is 4"high.  You also get
a rounded shank, a volute behind the nut,
an 11 degree pitched headstock that is 7 1/2"L from the nut and 3 1/2" W,
These blanks are made in Barberton, OH, USA,
Please note measurements
are within 1/32 of an inch.
NOTE:  The bottom 2 +" of the heel is glued on.
.