Venterior VT-FF001 Portable Fish Finder Handheld Yellow (blue backlight)

Description

Venterior VT-FF001 Portable Fish Finder Handheld Fishfinder Fishing Gear Depth Finder with Sonar Transducer and LCD Display (Yellow)
Product Details
Package Dimensions: 10.63 x 6.65 x 2.48 inches
Item Weight: 1.17 pounds
Manufacturer: Venterior
Shows you what is in the water: water depth, approximate fish location (suits for all sorts of fish), fish size(small/medium/big), short & tall weeds, sand & rocks on bottom. Suitable for fishing from a kayak, off the dock, and ice fishing. You can use the fish finder on moving kayak with slowly speed below 5mph. It can be used in fresh water as well as salt/sea water.
Easy to Use: Toss the transducer into water and turn on the display unit, it will show you the water depth and approximate fish depth if fish schools passing by. It has 5 user selectable sensitivity; battery save mode; backlight mode ; fish alarm; unit of measure. Setting can be saved when turned off.
Very portable that you can take it anywhere: It comes with neck strap that allow you to wear it around neck when you are busy on the kayak. And you can easily store the fish finder in your tackle box. The fishfinder is powered by 4 AAA batteries. It lasts 4-5 hours with new batteries in continuous use. It can be used in fresh water as well as salt/sea water.
Accurate Depth Reading: The fish finder use sonar to detect water depth and fish location. Sonar Frequency is 200 kHZ. Detectable area is 45 degrees beam angle under the sonar transducer. Detectable depth range is from 3ft/1m to 328ft/100m below the sonar transducer.
Color:Yellow (blue backlight)Specification : 1. Measure Units: Meters / Feet 2. Display: LCD display 3. Backlighting: LED 4. 4.6cm diameter Round transducer sensor 5. Depth Range : Max: 100m (328ft) ; Min: 0.9m (3ft) 6. Sensor Beam Angle: 45 degrees 7. Operating Temperature is from -20°C to 70°C (-4°F to 158°F) 8. Uses 4 x AAA batteries (not included) Package Included : 1. Fish Finder Display 2. Sonar Sensor (Transducer) with 25ft cable 3. Removable Transducer Float with Rubber Stopper 4. Transducer Side-Scan Adapter 5. Stainless Bolt and Wing Nut 6. Water-resistant bag for Display 7. Neck Strap 8. Operation Manual How to use the Sonar Sensor: 1. Toss the sensor and float into the water. 2. Attach the Side-Scan Adapter to the boat hull using the mounting tabs. 3. Attach the sensor to a handle, lower the sensor into the water. Attention: 1. It will turn off automatically if the depth display reads "---" continuously for 5 minutes. 2. It can not be used to detect bait fish or fish that is smaller than 10cm. 3. When use this fish finder on moving boat, please make sure the bottom of the transducer is horizontal and the moving speed is slowly (lower than 5 mph). 3. Strong waves, suspended matter and muddy water,will affect the performance.4. Its reading might be interfered with other high power sonar fish finder close to your fish finder. Please make sure there is no other sonar fish finder cloes to your fish finder.